Welding Rack

Welding Rack

Dia.240-900 (Max1400) Semi-automatic BWM-HJ08 Welding Frame Rack For Diamond Saw
新款1.2M 锯片焊接机架 02.jpg
Semi-automatic welding frame rack connect with hig

Dia.240-900 (Max1400) Semi-automatic BWM-HJ08 Welding Frame Rack For Diamond Saw

Product Specification:
  • Model :
  • Voltage :
  • Air Pressure :
    0.3 - 0.6
  • Water Pressure :
  • Parallelism :
  • Verticality :
  • Welding Range :
    Ø240 – Ø900 (Max Ø1400)
See Price
  1. Product Details

The "Dia.240-900 (Max1400) Semi-Automatic BWM-HJ08 Welding Frame Rack is used for Welding Diamond Circular Saw Blade from ø240mm to ø900mm. In addition, it also can be used for welding gang saw blade after specially modification, It is a new type of diamond saw blade welding auxiliary equipment. 

Dia.240-900 (Max1400) Semi-Automatic BWM-HJ08 Welding Frame Rack has gripper, pneumatic sliding table and other high-precision components, thus greatly improving the welding accuracy and efficiency, to protect the segments and the base of the welding strength. Compared with similar welding machine with a high level of automation, positioning accuracy, stability, and long service life.This series of products using user-friendly design, general workers can operate on the machine.In addition, the welding machine compact structure, most of the wearing parts can be found and purchased in the pneumatic tools shop in your side, rather than relying on the service agents.

1. Welding diameter range can be adjusted ;
2. Welding frame structure is compact and reliable ;
3. High efficiency and accuracy,low energy consumption ;
4. High level of automation, good stability, long service life ;
5. Most of the wearing parts are available in all parts of the hardware store to buy your own replacement, convenient and quick.
All of our products have been strictly tested before access to market.
Other specifications can be customized according to requirements.
Dia.240-900 (Max1400) Semi-automatic BWM-HJ08 Welding Frame Rack 

Model No. :  BWM-HJ08

Welding Range


Ø240 – Ø900 (Max Ø1400)







Welding Rate(Segments Qty/Min)


4 - 20

Air Pressure


0.3 - 0.6

Water Pressure





220 (Single-phase), 50HZ

Power (From LED Lighting)



Water Consumption



Machine Dimensions


L940 * W440 * H1440

Equipment Weight



Package Dimensions


L1600 * W520 * H550 (Horizontally)

Package Weight(Wooden Package)



Note :This machine doesn't include high frequency Welding machine,air compressor and water pump.​

Dia.240-900 (Max1400) Semi-Automatic BWM-HJ08 Welding Frame Rack For Diamond Saw Blades ​

Dia.240-900 (Max1400) Semi-automatic BWM-HJ08 Welding Frame Rack

The Details:

Dia.240-900 (Max1400) Semi-automatic BWM-HJ08 Welding Frame Rack

Dia.240-900 (Max1400)  BWM-HJ08 Welding Frame Rack

Dia.240-900 (Max1400) Semi-automatic BWM-HJ08 Welding Frame Rack                   

Dia.240-900 (Max1400) BWM-HJ08 Welding Frame Rack


Welding Frame Rack Accessories-Tool Box : 

Dia.240-900 (Max1400)  BWM-HJ08 Welding Frame Rack

Dia.240-900 (Max1400)  BWM-HJ08 Welding Frame Rack

How to Weld Diamond Segment to Saw Blade?
Diamond Segment is welded to saw blade with high frequency induction heating machine and Welding Frame. Since diamond segment and saw blade made of different metal, we adopt this brazing welding technique.  

1). Firstly, Stone cutting segments ground and polished by grinding wheel 
2). Secondly, Put silver soldering piece( silver-plated copper piece) between the diamond segment and saw blade
3). Thirdly, Turn on the high frequency welding machine to achieve water and high temperature
4). Finally, Weld the diamond segment and saw blade together.

1). Choose proper granite cutting segments according to the cutting material. Quality of diamond segment determine the cutting efficiency and lifespan of the saw blade. The technique should allow timely adjustment of diamond segment to make sure accurate welding.
2). Choose proper sliver soldering piece, silver content no less than 35%. pay attention to the welding temperature and time. Welding temperature should be set 600℃-800℃. too high temperature and too long period will make adjacent teeth stick together, then whole diamond saw blade deform. Isolation welding and diagonal welding is highly suggested to avoid the deformation of the saw blade.
3). Diamond saw blade should be naturally cooled on the welding frame for at least 2 hours before removed after welding process. Then the diamond saw blade should be hung vertically. Generally speaking, diamond saw blade can be put into use after 10-hours hanging.

Semi-Automatic Welding Frame Rack Machine packing in the wooden.
We can also pack the saw blade welding rack according to your requirements.
Special specifications need to be negotiated for delivery times.

Semi-automatic BWM-HJ08 Welding Frame Rack

Fujian Nan'an Boreway Machinery Co.,Ltd.
ADD: HuaHui Center, Shuitou Town,Quanzhou, Fujian, China, 
Post Code: 362342 
Tel.: 0086-595-86990206 
Fax: 0086-595-86990220 
Mobile/WhatsApp: +86 13215061605 
Wechat: +86 13215061605
Skype: boreway02 
E-mail: [email protected]
Write us

Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.

>> Drag slider validation